Services

DETAILED ENGINEERING & 3-D MODELLING

    Software Used:

  • AutoPlant
  • PDMS

Utility:

Used for Plant Design and Detailed Engineering.

Advantages:

  • 3-D Modeling of all the Equipments, Piping, Cable Trays, Steel, Concrete Structures, Supports, HVAC: A virtual construction of Plant is done by modeling all the vital areas / components in the plant for every discipline.
  • Walkthrough, design reviews, interference checks and report generation: Once the 3D modeling is complete, design reviews are performed wherein clash detection and report generation are done for clash resolving.
  • After resolving all the practical clashes, extraction of all the drawings, BOQ, reports generation is done. All the GA, Layouts, Isometric Drawings, Cable Routing, Steel & Architectural Drawings and other relevant documents are generated from the models.

Maintenance Concepts are developed by reviewing the buildings and components within.

Projects Implemented recently on 3-D


  • Fujairah Cement Industries , Dibba, UAE (2x20 MW)

    The scope of this project was complete EPC which included Main Plant Building, Boilers, Air Cooled Condensers, DM Plant Building, Coal Handling system, Ash Handling System, HVAC System and all other related areas.

    A complete 3D Modelling of all the disciplines was done, all clashes rectified and the layout drawings were prepared

  • Bhavnagar Energy Co. Ltd., Padva, Bhavnagar Dist., Gujarat (2x250 MW)

    A complete 3D modelling of all the related disciplines was done, reviews/ walkthrough were conducted and all the clashes rectified. Screen House building and Crusher House building were planned and optimised to a great extent during 3D reviews which resulted in huge savings and speedy execution of the buildings.

  • Chhabra Thermal Power Project, Rajasthan (2x250 MW)

    Located in the Indian State of Rajasthan, Chhabra is becoming a power-generation hub with the development of modern plants throughout the region. DESEIN was selected to design a thermal power plant near the village of Chowki Motipura. Three-dimensional modelling and pre-planned layout of the entire plant allowed dynamic walkthroughs for operations and maintenance personnel to view the plant before construction.

  • 4000 MW Ultra Mega Power Project at Mundra, Gujarat (CGPL)

    The scope of this project was to execute Ash Handling System. For detailed engineering, a complete 3D modelling of all the related disciplines was done, reviews / walkthrough were conducted and all the clashes rectified,afterwards all the layout drawings were extracted from the same model. All the piping isometric drawings, steel drawings and the bill of materials for piping / fittings and steel were generated out of the model itself.

  • 108 MW Rithala Gas Based Combined Cycle Power Project, NDPL, Delhi

    Scope: A complete 3D modelling of all the related disciplines was done, reviews / walkthrough were conducted and all the clashes rectified. Main areas included are gas turbine, generator, air intake filters, HRSG, steam turbine building, cooling water area, DM plant and gas metering station.







Desein